Dig system for the Gmade R1.Caution: When setting up the R1 with dig, it is important to set your AUX channels travel/EPA to “Zero” in any direction. If this is not done, servo failure can occur. You can adjust the Travel/EPA settings for each direction. While adjusting the travel, note that once the Dig rod stops moving, you should stop adjustment. If any more travel is set, the servo could be damaged.
CNC machined from solid billet aircraft aluminium and carbon steelSuper light weightCarbon steel dig outdrive (Heat treatment)Brass slide rod keeps things moving smoothlyWorks with mini and standard sized servosEasy InstallationDig system x1Servo plate x1Servo mount x2Linkage x1Installation Screws and BoltsNote: Don't use Dig for race setup
Mini or standard sized servo3 Channel Radio (A 3-position Aux channel is required. A 2-position Aux channel can be used as well, however only rear dig can be used.)