01536 725416

35248 Tamiya German Tank Destroyer Marder III

0/50/50/50/50/5
Product Code: TA35248
Stock Status: Usually Ships in 1 to 2 Days
£29.99loading (inc VAT @ 20%)
Price Match
 
Original Price:

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
 
  • Description
  • Features

In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improved captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. The 38(t) tanks were based on the LtVz.38 tank, which was developed for use by the Czech company CKD (later BMM) for the Czech army in 1938. In 1939, with the annexation of Czechoslovakia, this tank went into production for the Wehrmacht. The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r) gun, resulting in the creation the Wehrmacht's fearsome tank hunter, the Marder III Sd.Kfz.139. The turret base of the Pk.Kpfw.38(t) was removed and a 16mm steel plate was attached in its place. The Soviet 7.62cm Pak36(r) gun was mounted on that plate, 11mm armor plating installed to the front and sides, and massive stirrups immobilized the gun.

Overall length: 174mm
Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction
All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated
Protective armor and sighting equipment moves with raising and lowering of main gun
Crew seats and large clamp for main gun can be modeled in the fighting or moving positions
Two crew figures are included in set
Five kinds of battlefield markings are included

35248 Tamiya German Tank Destroyer Marder III

Price: £29.99loading (inc VAT @ 20%)
0/50/50/50/50/5
Product Code: TA35248
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Quantity:
  | 
 

  • Description
  • Features

In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improved captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. The 38(t) tanks were based on the LtVz.38 tank, which was developed for use by the Czech company CKD (later BMM) for the Czech army in 1938. In 1939, with the annexation of Czechoslovakia, this tank went into production for the Wehrmacht. The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r) gun, resulting in the creation the Wehrmacht's fearsome tank hunter, the Marder III Sd.Kfz.139. The turret base of the Pk.Kpfw.38(t) was removed and a 16mm steel plate was attached in its place. The Soviet 7.62cm Pak36(r) gun was mounted on that plate, 11mm armor plating installed to the front and sides, and massive stirrups immobilized the gun.

Overall length: 174mm
Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction
All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated
Protective armor and sighting equipment moves with raising and lowering of main gun
Crew seats and large clamp for main gun can be modeled in the fighting or moving positions
Two crew figures are included in set
Five kinds of battlefield markings are included

Customer Reviews
Be the first to review this product | Write a Review and share your opinions!
Help our customers make the best choices by telling everyone what you think about this product.

35248 Tamiya German Tank Destroyer Marder III

0/50/50/50/50/5
Product Code: TA35248
Stock Status: Usually Ships in 1 to 2 Days
£29.99loading (inc VAT @ 20%)
Price Match
 
Original Price:

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
 
  • Description
  • Features

In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improved captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. The 38(t) tanks were based on the LtVz.38 tank, which was developed for use by the Czech company CKD (later BMM) for the Czech army in 1938. In 1939, with the annexation of Czechoslovakia, this tank went into production for the Wehrmacht. The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r) gun, resulting in the creation the Wehrmacht's fearsome tank hunter, the Marder III Sd.Kfz.139. The turret base of the Pk.Kpfw.38(t) was removed and a 16mm steel plate was attached in its place. The Soviet 7.62cm Pak36(r) gun was mounted on that plate, 11mm armor plating installed to the front and sides, and massive stirrups immobilized the gun.

Overall length: 174mm
Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction
All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated
Protective armor and sighting equipment moves with raising and lowering of main gun
Crew seats and large clamp for main gun can be modeled in the fighting or moving positions
Two crew figures are included in set
Five kinds of battlefield markings are included

35248 Tamiya German Tank Destroyer Marder III

Price: £29.99loading (inc VAT @ 20%)
0/50/50/50/50/5
Product Code: TA35248
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Quantity:
  | 
 

  • Description
  • Features

In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improved captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. The 38(t) tanks were based on the LtVz.38 tank, which was developed for use by the Czech company CKD (later BMM) for the Czech army in 1938. In 1939, with the annexation of Czechoslovakia, this tank went into production for the Wehrmacht. The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r) gun, resulting in the creation the Wehrmacht's fearsome tank hunter, the Marder III Sd.Kfz.139. The turret base of the Pk.Kpfw.38(t) was removed and a 16mm steel plate was attached in its place. The Soviet 7.62cm Pak36(r) gun was mounted on that plate, 11mm armor plating installed to the front and sides, and massive stirrups immobilized the gun.

Overall length: 174mm
Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction
All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated
Protective armor and sighting equipment moves with raising and lowering of main gun
Crew seats and large clamp for main gun can be modeled in the fighting or moving positions
Two crew figures are included in set
Five kinds of battlefield markings are included