01536 725416

58696 Tamiya Super Avante - TD4

0/50/50/50/50/5
Product Code: TA58696
Stock Status: Usually Ships in 1 to 2 Days
£309.00loading (inc VAT @ 20%)
Price Match
 
Original Price: £360.00loading

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
Radio Deal
 
  • Description
  • Features
  • Requires
Tamiya's designers have crafted the next fun to drive, 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, "Being Nuts is Neat!" The front of the all-new TD-4 chassis features a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.
1/10 R/C assembly kit
Length: 338mm
Height: 124mm
Width: 246mm
Wheelbase: 283mm
The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design
Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the centre and a midship transverse motor for optimum balance and improved performance
The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form
The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance
Features full ball bearings
Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup
Turnbuckle shafts for use with upper arms facilitate camber angle adjustment
Star dish wheels are paired with square spike tyres which offer superlative grip off-road
Choose between high and low type wing stays to adjust the downforce depending on the road surface
Comes with a driver figure for extra realism
High-torque servo saver
2 Channel RC Unit with low profile steering servo
Electronic Speed Controller (ESC)
Motor
7.2v Race pack and charger
Paint and tools to build kit

58696 Tamiya Super Avante - TD4

Price: £309.00loading (inc VAT @ 20%)
RRP: £360.00loading you save £51.00loading
0/50/50/50/50/5
Product Code: TA58696
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Radio Deal
Quantity:
  | 
 

  • Description
  • Features
  • Requires
Tamiya's designers have crafted the next fun to drive, 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, "Being Nuts is Neat!" The front of the all-new TD-4 chassis features a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.
1/10 R/C assembly kit
Length: 338mm
Height: 124mm
Width: 246mm
Wheelbase: 283mm
The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design
Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the centre and a midship transverse motor for optimum balance and improved performance
The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form
The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance
Features full ball bearings
Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup
Turnbuckle shafts for use with upper arms facilitate camber angle adjustment
Star dish wheels are paired with square spike tyres which offer superlative grip off-road
Choose between high and low type wing stays to adjust the downforce depending on the road surface
Comes with a driver figure for extra realism
High-torque servo saver
2 Channel RC Unit with low profile steering servo
Electronic Speed Controller (ESC)
Motor
7.2v Race pack and charger
Paint and tools to build kit

Customer Reviews
Be the first to review this product | Write a Review and share your opinions!
Help our customers make the best choices by telling everyone what you think about this product.

58696 Tamiya Super Avante - TD4

0/50/50/50/50/5
Product Code: TA58696
Stock Status: Usually Ships in 1 to 2 Days
£309.00loading (inc VAT @ 20%)
Price Match
 
Original Price: £360.00loading

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
Radio Deal
 
  • Description
  • Features
  • Requires
Tamiya's designers have crafted the next fun to drive, 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, "Being Nuts is Neat!" The front of the all-new TD-4 chassis features a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.
1/10 R/C assembly kit
Length: 338mm
Height: 124mm
Width: 246mm
Wheelbase: 283mm
The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design
Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the centre and a midship transverse motor for optimum balance and improved performance
The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form
The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance
Features full ball bearings
Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup
Turnbuckle shafts for use with upper arms facilitate camber angle adjustment
Star dish wheels are paired with square spike tyres which offer superlative grip off-road
Choose between high and low type wing stays to adjust the downforce depending on the road surface
Comes with a driver figure for extra realism
High-torque servo saver
2 Channel RC Unit with low profile steering servo
Electronic Speed Controller (ESC)
Motor
7.2v Race pack and charger
Paint and tools to build kit

58696 Tamiya Super Avante - TD4

Price: £309.00loading (inc VAT @ 20%)
RRP: £360.00loading you save £51.00loading
0/50/50/50/50/5
Product Code: TA58696
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Radio Deal
Quantity:
  | 
 

  • Description
  • Features
  • Requires
Tamiya's designers have crafted the next fun to drive, 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, "Being Nuts is Neat!" The front of the all-new TD-4 chassis features a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.
1/10 R/C assembly kit
Length: 338mm
Height: 124mm
Width: 246mm
Wheelbase: 283mm
The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design
Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the centre and a midship transverse motor for optimum balance and improved performance
The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form
The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance
Features full ball bearings
Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup
Turnbuckle shafts for use with upper arms facilitate camber angle adjustment
Star dish wheels are paired with square spike tyres which offer superlative grip off-road
Choose between high and low type wing stays to adjust the downforce depending on the road surface
Comes with a driver figure for extra realism
High-torque servo saver
2 Channel RC Unit with low profile steering servo
Electronic Speed Controller (ESC)
Motor
7.2v Race pack and charger
Paint and tools to build kit