01536 725416

60315 Tamiya Lockheed F-16CJ Fighting Falcon

0/50/50/50/50/5
Product Code: TA60315
Stock Status: Usually Ships in 1 to 2 Days
£134.99loading (inc VAT @ 20%)
Price Match
 
Original Price:

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
 
  • Description
  • Features

Highly regarded as one of the world's leading lightweight multi-purpose fighters, the F-16 Fighting Falcon is capable of precision attack during air-to-air and air-to-surface combat. The success of the F-16 comes from its precision control, with aerodynamic body design combining with innovative electronic fly-by-wire technology for precision maneuvering at both low and high speeds, and low and high altitudes. Fitted with one single turbo jet engine, the F- 16 has a top speed of over Mach 2. Currently used by more than 20 countries around the world, the F-16 has been deployed to actual conflict since the 1980's including seeing action in significant conflicts such as the Arab-Israeli conflict, the Gulf War, Kosovo, Afghanistan and Iraq.

Delivered to units from August 1991, the F-16 Block 50 is the newest F-16 currently being deployed to U.S. units. Major upgrades added to the Block 50 were a more powerful turbo engine, an improved radar and an improved countermeasure system. Fitted with a General Electric engine, the fuselage features the distinctive wide "Big Mouth" air duct that was first introduced on the Block 30. The Block 50 variant, the F-16CJ, comes equipped with AGM-88 HARM (High-speed Anti-Radiation Missile) and AN/ASQ-213 HARM Targeting System (HTS), and are used for SEAD (Suppression of Enemy Air Defense) missions, which include searching out and destroying air-defense radar and missile sites. F-16CJ were delivered to units from May 1993, and were used during Operation Iraqi Freedom and patrol of the no-fly zone over Iraq following the Gulf War.

Immaculately detailed jet engine can be removed and loaded via a hook and rail system. Stores can be removed and replaced after assembly. Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps move after assembly Ejector seat slides up and down on a rail. Metal pitot tube and static dischargers Die-cast metal landing gear Photo-etched seatbelt buckles, radar antenna and flare dispensers 1 pilot figure Box designed to store model after assembly.

General Electric F-110 jet engine replicated in precise detail
Engine slides into aircraft on a hook and rail system exactly like the actual aircraft
Engine can be displayed outside of aircraft using its very own cart
Moveable ejector seat placed on slide rail like actual aircraft
Curved bubbletop canopy can be assembled in the opened or closed position
Choice of two types of canopy, clear and smoked
1 pilot figure for cockpit included
Pilot tube and static dischargers reproduced using metal parts
Die-cast landing gear for extra durability
Metal weight added to nose for accurate front-rear weight distribution
Includes actual rubber tires
Photo-etched parts used for seat buckles, radar antenna, chaff/flare dispensers and name-plate for high-quality display
Nose cone can be opened and closed allowing display of accurately recreated radar
Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps can move after assembly thanks to poly caps
Missiles can be removed and replaced even after assembly
Gun hatch can be opened after assembly displaying machine gun
Packaging box has been specially designed allowing large scale model to be easily stored even after assembly

60315 Tamiya Lockheed F-16CJ Fighting Falcon

Price: £134.99loading (inc VAT @ 20%)
0/50/50/50/50/5
Product Code: TA60315
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Quantity:
  | 
 

  • Description
  • Features

Highly regarded as one of the world's leading lightweight multi-purpose fighters, the F-16 Fighting Falcon is capable of precision attack during air-to-air and air-to-surface combat. The success of the F-16 comes from its precision control, with aerodynamic body design combining with innovative electronic fly-by-wire technology for precision maneuvering at both low and high speeds, and low and high altitudes. Fitted with one single turbo jet engine, the F- 16 has a top speed of over Mach 2. Currently used by more than 20 countries around the world, the F-16 has been deployed to actual conflict since the 1980's including seeing action in significant conflicts such as the Arab-Israeli conflict, the Gulf War, Kosovo, Afghanistan and Iraq.

Delivered to units from August 1991, the F-16 Block 50 is the newest F-16 currently being deployed to U.S. units. Major upgrades added to the Block 50 were a more powerful turbo engine, an improved radar and an improved countermeasure system. Fitted with a General Electric engine, the fuselage features the distinctive wide "Big Mouth" air duct that was first introduced on the Block 30. The Block 50 variant, the F-16CJ, comes equipped with AGM-88 HARM (High-speed Anti-Radiation Missile) and AN/ASQ-213 HARM Targeting System (HTS), and are used for SEAD (Suppression of Enemy Air Defense) missions, which include searching out and destroying air-defense radar and missile sites. F-16CJ were delivered to units from May 1993, and were used during Operation Iraqi Freedom and patrol of the no-fly zone over Iraq following the Gulf War.

Immaculately detailed jet engine can be removed and loaded via a hook and rail system. Stores can be removed and replaced after assembly. Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps move after assembly Ejector seat slides up and down on a rail. Metal pitot tube and static dischargers Die-cast metal landing gear Photo-etched seatbelt buckles, radar antenna and flare dispensers 1 pilot figure Box designed to store model after assembly.

General Electric F-110 jet engine replicated in precise detail
Engine slides into aircraft on a hook and rail system exactly like the actual aircraft
Engine can be displayed outside of aircraft using its very own cart
Moveable ejector seat placed on slide rail like actual aircraft
Curved bubbletop canopy can be assembled in the opened or closed position
Choice of two types of canopy, clear and smoked
1 pilot figure for cockpit included
Pilot tube and static dischargers reproduced using metal parts
Die-cast landing gear for extra durability
Metal weight added to nose for accurate front-rear weight distribution
Includes actual rubber tires
Photo-etched parts used for seat buckles, radar antenna, chaff/flare dispensers and name-plate for high-quality display
Nose cone can be opened and closed allowing display of accurately recreated radar
Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps can move after assembly thanks to poly caps
Missiles can be removed and replaced even after assembly
Gun hatch can be opened after assembly displaying machine gun
Packaging box has been specially designed allowing large scale model to be easily stored even after assembly

Customer Reviews
Be the first to review this product | Write a Review and share your opinions!
Help our customers make the best choices by telling everyone what you think about this product.

60315 Tamiya Lockheed F-16CJ Fighting Falcon

0/50/50/50/50/5
Product Code: TA60315
Stock Status: Usually Ships in 1 to 2 Days
£134.99loading (inc VAT @ 20%)
Price Match
 
Original Price:

Find out more about Fusion Points...
 
we accept these credit cards
 
Optional Extras
 
  • Description
  • Features

Highly regarded as one of the world's leading lightweight multi-purpose fighters, the F-16 Fighting Falcon is capable of precision attack during air-to-air and air-to-surface combat. The success of the F-16 comes from its precision control, with aerodynamic body design combining with innovative electronic fly-by-wire technology for precision maneuvering at both low and high speeds, and low and high altitudes. Fitted with one single turbo jet engine, the F- 16 has a top speed of over Mach 2. Currently used by more than 20 countries around the world, the F-16 has been deployed to actual conflict since the 1980's including seeing action in significant conflicts such as the Arab-Israeli conflict, the Gulf War, Kosovo, Afghanistan and Iraq.

Delivered to units from August 1991, the F-16 Block 50 is the newest F-16 currently being deployed to U.S. units. Major upgrades added to the Block 50 were a more powerful turbo engine, an improved radar and an improved countermeasure system. Fitted with a General Electric engine, the fuselage features the distinctive wide "Big Mouth" air duct that was first introduced on the Block 30. The Block 50 variant, the F-16CJ, comes equipped with AGM-88 HARM (High-speed Anti-Radiation Missile) and AN/ASQ-213 HARM Targeting System (HTS), and are used for SEAD (Suppression of Enemy Air Defense) missions, which include searching out and destroying air-defense radar and missile sites. F-16CJ were delivered to units from May 1993, and were used during Operation Iraqi Freedom and patrol of the no-fly zone over Iraq following the Gulf War.

Immaculately detailed jet engine can be removed and loaded via a hook and rail system. Stores can be removed and replaced after assembly. Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps move after assembly Ejector seat slides up and down on a rail. Metal pitot tube and static dischargers Die-cast metal landing gear Photo-etched seatbelt buckles, radar antenna and flare dispensers 1 pilot figure Box designed to store model after assembly.

General Electric F-110 jet engine replicated in precise detail
Engine slides into aircraft on a hook and rail system exactly like the actual aircraft
Engine can be displayed outside of aircraft using its very own cart
Moveable ejector seat placed on slide rail like actual aircraft
Curved bubbletop canopy can be assembled in the opened or closed position
Choice of two types of canopy, clear and smoked
1 pilot figure for cockpit included
Pilot tube and static dischargers reproduced using metal parts
Die-cast landing gear for extra durability
Metal weight added to nose for accurate front-rear weight distribution
Includes actual rubber tires
Photo-etched parts used for seat buckles, radar antenna, chaff/flare dispensers and name-plate for high-quality display
Nose cone can be opened and closed allowing display of accurately recreated radar
Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps can move after assembly thanks to poly caps
Missiles can be removed and replaced even after assembly
Gun hatch can be opened after assembly displaying machine gun
Packaging box has been specially designed allowing large scale model to be easily stored even after assembly

60315 Tamiya Lockheed F-16CJ Fighting Falcon

Price: £134.99loading (inc VAT @ 20%)
0/50/50/50/50/5
Product Code: TA60315
Brand: Tamiya
Stock Status: Usually Ships in 1 to 2 Days
Quantity:
  | 
 

  • Description
  • Features

Highly regarded as one of the world's leading lightweight multi-purpose fighters, the F-16 Fighting Falcon is capable of precision attack during air-to-air and air-to-surface combat. The success of the F-16 comes from its precision control, with aerodynamic body design combining with innovative electronic fly-by-wire technology for precision maneuvering at both low and high speeds, and low and high altitudes. Fitted with one single turbo jet engine, the F- 16 has a top speed of over Mach 2. Currently used by more than 20 countries around the world, the F-16 has been deployed to actual conflict since the 1980's including seeing action in significant conflicts such as the Arab-Israeli conflict, the Gulf War, Kosovo, Afghanistan and Iraq.

Delivered to units from August 1991, the F-16 Block 50 is the newest F-16 currently being deployed to U.S. units. Major upgrades added to the Block 50 were a more powerful turbo engine, an improved radar and an improved countermeasure system. Fitted with a General Electric engine, the fuselage features the distinctive wide "Big Mouth" air duct that was first introduced on the Block 30. The Block 50 variant, the F-16CJ, comes equipped with AGM-88 HARM (High-speed Anti-Radiation Missile) and AN/ASQ-213 HARM Targeting System (HTS), and are used for SEAD (Suppression of Enemy Air Defense) missions, which include searching out and destroying air-defense radar and missile sites. F-16CJ were delivered to units from May 1993, and were used during Operation Iraqi Freedom and patrol of the no-fly zone over Iraq following the Gulf War.

Immaculately detailed jet engine can be removed and loaded via a hook and rail system. Stores can be removed and replaced after assembly. Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps move after assembly Ejector seat slides up and down on a rail. Metal pitot tube and static dischargers Die-cast metal landing gear Photo-etched seatbelt buckles, radar antenna and flare dispensers 1 pilot figure Box designed to store model after assembly.

General Electric F-110 jet engine replicated in precise detail
Engine slides into aircraft on a hook and rail system exactly like the actual aircraft
Engine can be displayed outside of aircraft using its very own cart
Moveable ejector seat placed on slide rail like actual aircraft
Curved bubbletop canopy can be assembled in the opened or closed position
Choice of two types of canopy, clear and smoked
1 pilot figure for cockpit included
Pilot tube and static dischargers reproduced using metal parts
Die-cast landing gear for extra durability
Metal weight added to nose for accurate front-rear weight distribution
Includes actual rubber tires
Photo-etched parts used for seat buckles, radar antenna, chaff/flare dispensers and name-plate for high-quality display
Nose cone can be opened and closed allowing display of accurately recreated radar
Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps can move after assembly thanks to poly caps
Missiles can be removed and replaced even after assembly
Gun hatch can be opened after assembly displaying machine gun
Packaging box has been specially designed allowing large scale model to be easily stored even after assembly